Advanced Search
| Title | Publication | Publish Year |
|---|---|---|
|
Furnish moisture content, resin nonvolatile content, and assembly time effects on properties of mixed hardwood strandboard
The objective of this research was to investigate the effects of three levels each of furnish moisture content (MC) (2%, 5%, 8%), resin nonvolatile content (50.8%, 54.8%, 58.8%), and assembly […]
|
Forest Products Journal | 1988 |
|
Gap-Filling Phenol-Resorcinol Resin Adhesives for Construction
The consistency of a conventional phenol-resorcinol-formaldehyde resin adhesive was increased to the mastic-like consistency of an elastomeric construction adhesive by adding fillers of asbestos, walnut shell flour, or wood flour. […]
|
Forest Products Journal | 1973 |
|
Gel Permeation Chromatography and Its Use in the Development of Resins
Because polymeric materials are mixtures of molecules of various sizes and weights, average molecular weight is used to describe them, but this can be misleading because polymers of the same […]
|
Forest Products Journal | 1970 |
|
General and Technical Aspects of Prefabrication
Though mass production of almost all consumer items in the United States has been readily accepted, widespread prefabrication of housing has met with obstacles; these include lack of government support, […]
|
Forest Products Journal | 1952 |
|
Geometry as An Independent Variable in Adhesive Joint Studies
The relationship of breaking strength of cross-lap glued specimens to adhesive bond quality was studied extensively in a series of experiments. Block thickness influenced strength values markedly suggesting that rheology […]
|
Forest Products Journal | 1962 |
|
Gluability of out-of-service utility poles
This investigation determined the gluability of weathered, out-of-service southern yellow pine (SYP) (Pinus spp.) utility poles. Three types of adhesives were used: resorcinol-phenol formaldehyde (RPF), polyvinyl acetate (PVA), and casein. […]
|
Forest Products Journal | 2000 |
|
Gluability of Platen-Dried Veneer of Douglas-Fir
Because increased platen temperatures may be one way of offsetting low productivity with platen dryers, this study determined how platen drying at temperatures ranging from 325?F to 460?F affected strength […]
|
Forest Products Journal | 1983 |
|
Gluability of Sanded Lumber
Data show that sanded Douglas-fir and southern pine lumber sanded on present high-speed commercial sanders when glued will not pass tests for structural water-resistant gluelines. Sanded ponderosa pine can be […]
|
Forest Products Journal | 1985 |
|
Gluability of Southern Pine Earlywood and Latewood
Glue-bond quality, as tested wet and dry in tension, was best with earlywood to earlywood and poorest with latewood to latewood; earlywood to latewood was intermediate. Optimum closed assembly, time […]
|
Forest Products Journal | 1968 |
|
Gluability of Southern Pine Veneer Dried At High Temperatures
The study reported was designed to provide information on the effects of maximum surface temperature and extractives on gluability of southern pine veneer dried in an oven maintained at 500?F. […]
|
Forest Products Journal | 1968 |
|
Glue Durability in Finger-Jointed Southern Pine
The structural laminating industry is rapidly converting from simple scarf joints to high strength finger joints for end jointing lumber. For those structural laminates that receive outdoor exposure, it is […]
|
Forest Products Journal | 1968 |
|
Glue Line Doctor
To understand the functioning of an adhesive, it has been found helpful to depict glue as living matter which must perform certain life processes in developing into a bond. A […]
|
Forest Products Journal | 1951 |
|
Glue Spreading By Spraying Method
An improved spreader to spray-apply glue uniformly to veneer moving in a continuous line at a rate of about 80 fpm was developed and found feasible in an evaluation study. […]
|
Forest Products Journal | 1957 |
|
Glue Spreading Efficiency of Roll Spreaders
A study of the spreader roll application of phenolic resin adhesives to plywood core veneers–using resin source, adhesive formulation, roll-groove pattern, degree of wear on the roll, and variations of […]
|
Forest Products Journal | 1970 |
|
Gluebond Strength of Laser Cut Wood
The degree of strength loss when gluing laser cut wood as compared to conventionally sawn wood and the amount of additional surface treatment needed to improve bond quality were assessed […]
|
Forest Products Journal | 1985 |
|
Glueline Characteristics and Bond Durability of Southeast Asian Species After Solvent Extraction and Planing of Veneers
Bond durability and microscopic characteristics of gluelines were studied in plywood made with veneers of nine species of Southeast Asian woods. Veneers were either planed, extracted with a 1 percent […]
|
Forest Products Journal | 1980 |
|
Glueline Identification
Nondestructive techniques are presented for field identification of wood adhesives. These are based on the appearance of the glueline and the use of a special indicator for determining the relative […]
|
Forest Products Journal | 1967 |
|
Glues for Use with High-Frequency Heating
Perpendicular high-frequency heating is used for making both flat and curved plywood, laminated wood, and furniture panels. Almost any heat-sensitive glue can be used, but glues of the cold-setting type […]
|
Forest Products Journal | 1948 |
|
Gluing Characteristics of Determa
Using plywood shear and block shear tests, the gluing properties of the tropical wood determa (Ocotea rubra Mez) were determined using phenol-formaldehyde, resorcinol- formaldehyde, urea-formaldehyde, melamine-formaldehyde, and casein glues. Other […]
|
Forest Products Journal | 1959 |
|
Gluing Characteristics of Softwood Veneers and Secondary Western Hardwood
Most adhesives developed for the softwood plywood industry were designed for use with Douglas-fir (Pseudotsuga menziesii). With the interest in utilizing other western softwoods and hardwoods in plywood, a review […]
|
Forest Products Journal | 1961 |
|
Gluing Characteristics of Treated Sweetgum Veneer
To examine the effect of preservative types and retentions on the effectiveness of three common adhesives, a study was made using sapwood veneer from one single sweetgum tree. Sapwood of […]
|
Forest Products Journal | 1962 |
|
Gluing Hardboard to Fir Plywood and Phenolic Resin Adhesives
Phenol-formaldehyde resins were tested for their suitability in producing a boil-proof bond between fir plywood and hardboard. The test used was a modification of the conventional knife test, which causes […]
|
Forest Products Journal | 1955 |
|
Gluing Hardboard with Protein Adhesives
Thirteen adhesives for gluing hardboard were evaluated. Among the types of protein adhesives were soya, blood, soya-blood blend, casein, and soya-casein blend glues. The cold press, no clamp feature of […]
|
Forest Products Journal | 1954 |
|
Gluing High Pressure Decorative Laminates
It is stated that 150 million sq.-ft. of high-pressure-laminate plastic overlay was produced in 1955. Plastic overlays go into a host of products readily accepted by the consumer. Most laminates […]
|
Forest Products Journal | 1957 |
|
Gluing of Furniture Parts
To sucessfully glue furniture, many factors have to be controlled. In the Drexel Furniture Co. plants, all employees involved with gluing attend training programs on the subject, followed by on-the-job […]
|
Forest Products Journal | 1954 |