Advanced Search
| Title | Publication | Publish Year |
|---|---|---|
|
Variables in Specimen Preparation Influence Results of IB Tests on Particleboard
The internal bond strength of particleboard was observed to vary with several factors including type of glue, how it was spread, and how surfaces were prepared. To evaluate these variables, […]
|
Forest Products Journal | 1964 |
|
Variables in Vacuum Laminating of Thermoplastic Films
This paper discusses major variables affecting the shaping of wood parts to be laminated with thermoplastic films. Variables include the stretch characteristics of two 8 mil decorative polyvinyl chloride films […]
|
Forest Products Journal | 1971 |
|
Variation in selected properties of industrial grade particleboard
Information about the variability of physical and mechanical properties of industrial grade particle-board is seldom made available. In this study, 3/8-inch particleboard was obtained for evaluation from seven different sources […]
|
Forest Products Journal | 1994 |
|
Versatile Fire Retardants from Amino-Resins
There is a need for fire retardants which can be applied by conventional processes to bring a broad spectrum of wood products up to recognized standards of flame and glow […]
|
Forest Products Journal | 1974 |
|
Visual Method for Measuring Formaldehyde Release from Resin Bonded Boards
An alkaline solution of purpald (4-amino-3-hydrazino-5-mercapto-1,2,4-triazole) reacts with formaldehyde and turns purple. The intensity of the color produced can be used to measure the release of formaldehyde from particle board […]
|
Forest Products Journal | 1974 |
|
Volatile organic compound emissions arising from the hot-pressing of mixed-hardwood particleboard
This study investigated the effects of adhesive type and press variables on the volatile organic compound (VOC) emissions arising from hot-pressing mixed-hardwood particleboard. Three adhesive types, urea-formaldehyde resin (UF), phenol-formaldehyde […]
|
Forest Products Journal | 2002 |
|
Volatile organic compound emissions during hot-pressing of southern pine particleboard: panel size effects and trade-off between press time and temperature
In previous research, it was shown that decreasing either press temperature or press time generally resulted in decreased volatile organic compound (VOC) emissions during the hot-pressing of southern pine particleboard. […]
|
Forest Products Journal | 2002 |
|
Wafer Dimension Control: Number One Design Criterion for Plant Producing Particleboard for Building Construction Uses
The production of particleboards specifically designed for critical housing applications requires that the process employed be capable of producing a variety of products in a range of thicknesses which could […]
|
Forest Products Journal | 1963 |
|
Waferboard Press Closing Strategies
During pressing of aspen waferboard, the wood wafers are compressed to an average density 1.75 times as great as the original wood density. The pressures required to accomplish this densification […]
|
Forest Products Journal | 1982 |
|
Wattle-Base Adhesives for Exterior Grade Particleboards
Different types of wattle-based adhesives were used to produce particleboards of exterior grade quality. Reduction of the viscosity of wattle extract was achieved by acid and subsequent alkaline hydrolysis of […]
|
Forest Products Journal | 1978 |
|
Weatherability of Phenolic-Bonded Ghanaian Hardwood Flakeboard Made from ACA-Treated Flakes
Ring flakes manufactured from a chip mixture of 22 Ghanaian hardwood species in equal weight proportions were treated to four retention levels (0.0, 0.2, 0.4, and 0.6 pcf or 0.0, […]
|
Forest Products Journal | 1979 |
|
What Is Being Done to Abate Pollution By Plywood and Particleboard Plants?
The pollution problem in the plywood industry is similar to that in the lumber industry. Most plywood plants are able to burn wood residue with little difficulty because the average […]
|
Forest Products Journal | 1967 |
|
Whole Wood as a Potential Source for Shaped Articles
A review of the effect of heat and pressure on wood, particularly the techniques used to “reform” wood particles into shaped articles without the use of added chemical binders. Two […]
|
Forest Products Journal | 1955 |
|
Withdrawal Loads for Screws in Soft Maple and Particleboard
The forces required to pull three types of wood screws from specimens of soft maple and particleboard were analyzed in a test of holding power. The three types of wood […]
|
Forest Products Journal | 1969 |
|
Withdrawal Strength of Dowels from Wood Composites
Wood dowels are commonly used to join particleboard, medium- density fiberboard, and other wood composites together in many types of furniture construction yet little information is available concerning their holding […]
|
Forest Products Journal | 1985 |
|
Within-panel variability and selected property relationships of particleboard from single- and mixed-species processes
This study was part of a large particleboard project, which investigated the influence of species variation on the variability of particleboard properties. The first paper examined the between-panel variability of […]
|
Forest Products Journal | 1999 |
|
Wood Adhesives from Wattle Bark Extract
Condensed flavonoid tannins from the bark extract of black wattle (Acacia mearnsii De Wild.) were used to prepare thermosetting adhesive resins for the production of exterior grade plywood, block-board and […]
|
Forest Products Journal | 1976 |
|
Wood Density and Board Composition Effects on Phenolic Resin-Bonded Flakeboard
Selected factors affecting the resistance of particleboard aging were studied. Emphasis was placed on variables thought to relate to compaction, crushing, and the role of interparticle bonding as they affect […]
|
Forest Products Journal | 1978 |
|
Wood material use in the U.S. cabinet industry 1999 to 2001
Fax and mail questionnaires were used to estimate consumption of wood-based products by the U.S. cabinet industry and evaluate current management issues affecting the cabinet industry. Results indicated that the […]
|
Forest Products Journal | 2003 |
|
Wood material use in the U.S. furniture industry: 1990 to 1992
United States’ wood household, upholstered, and wood office furniture manufacturers were sampled to assess the volumes of several raw materials used in wood furniture in 1990, and to predict the […]
|
Forest Products Journal | 1993 |
|
Wood material use in the U.S. wood furniture industry
Wood household, upholstered, and wood office furniture manufacturing locations in the U.S. were sampled to provide an assessment of wood materials use. Total hardwood lumber used in 1989 was estimated […]
|
Forest Products Journal | 1992 |
|
Wood Particle Molding
Some 8-1/2 million pounds of resin and ten times this weight of ground wood were used in 1955 to mold products such as toilet seats, croquet balls, shuffle-board discs, women’s […]
|
Forest Products Journal | 1957 |
|
Wood Particleboard–A Giant in the Making
A brief history is given of the particleboard industry in Western Germany from 1950 to 1955. The production of particleboard in the U.S. in 1955 is estimated to be 80 […]
|
Forest Products Journal | 1956 |
|
Wood Products Use Trends in FHA-Inspected Single-Family Houses
In 1968, an average of 10,271 board feet of lumber, 4,158 square feet (3/8-inch basis) of Plywood, 1,062 square feet (1/8-inch basis) of hardboard, 742 square feet (1/2- inch basis) […]
|
Forest Products Journal | 1971 |
|
Wood Residue Energy Conversion Systems Market
Individual, on-site interviews were conducted with management personnel in 79 sawmills throughout Oregon and California to determine the production, usage, and revenue patterns for their residue products. The mills surveyed […]
|
Forest Products Journal | 1976 |