Advanced Search
| Title | Publication | Publish Year |
|---|---|---|
|
Effect of residue type and tannin content on properties of particleboard manufactured from black locust
The objective of this study was to determine some of the properties of experimental particleboard panels made from black locust (Robinia pseudoacacia L.). The furnish contained soundwood, partially decayed wood, […]
|
Forest Products Journal | 2004 |
|
Effect of Resin Content and Density on Acoustic Emission from Particleboard During Internal Bond Testing
Handmade particleboard, representing a wide range of density and resin levels, was tested for internal bond (IB) while monitored for acoustic emission (AE) events. The 175-kHz AE sensor was mounted […]
|
Forest Products Journal | 1986 |
|
Effect of Several Production Variables on Modulus of Rupture and Internal Bond Strength of Boards Made of Green Douglas-Fir Planer Shavings
Using planer shavings from Douglas-fir (Pseudotsuga menziesii), boards were made with variables as follows: three specific gravity levels, 0.60, 0.75, 0.90; three wax levels, 0 percent, 0.75 percent, l.5 percent; […]
|
Forest Products Journal | 1957 |
|
Effect of Species and Panel Density on Durability of Structural Flakeboard
Structural flakeboard panels made with species of sweetgum, hickories, red oaks, white oaks, and southern pines, and with a 20 percent mixture of each species group, were subjected to a […]
|
Forest Products Journal | 1985 |
|
Effect of Temperature and Humidity on Toughness of Three Structural Particleboards
To verify environmental/impact strength relationships for structural particleboards the effect of environmental conditions on the toughness of three commercially produced structural particleboards was studied. Variables examined were temperature, relative humidity, […]
|
Forest Products Journal | 1976 |
|
Effect of Three Species of Logging Slash on the Properties of Aspen Planer Shavings Particleboard
Particleboard furnishes were prepared from three species of logging slash – aspen, jack pine, and black spruce – by chipping the slash and flaking the green chips in a ring […]
|
Forest Products Journal | 1975 |
|
Effect of ventilation and loading rates in large chamber testing of formaldehyde emissions from composite panels
A series of 17 particleboard and medium-density fiberboard products were tested for formaldehyde emission in a large-scale test chamber at varied air ventilation and product loading levels. Data were used […]
|
Forest Products Journal | 1987 |
|
Effect of Ventilation Rate and Board Loading on Formaldehyde Concentration: A Critical Review of the Literature
A critical literature review has been carried out on the influence of ventilation rate (N, hr.-1) and board loading (L, m2/m3) on steady state formaldehyde concentrations (Cs, ppm) resulting from […]
|
Forest Products Journal | 1984 |
|
Effect of Western Larch Extractives on Cement Setting
This paper describes the inhibitory impact of water soluble extractives in western larch (Larix occidentalis) on portland cement setting. Hydration data is used to assess this inhibitory impact. It was […]
|
Forest Products Journal | 1986 |
|
Effects of a High and Low Relative Humidity Cycle on Properties of Southern Yellow Pine Particleboards
Among the three types of boards tested (Urea with wax, phenolic with and without wax), after one complete cycle (65 percent, 30 percent, 65 percent, 90 percent, 65 percent RH), […]
|
Forest Products Journal | 1976 |
|
Effects of Accelerated Aging Tests on Some Bending Properties of Hardwood Composite Panels
There is a lack of information on the effects of accelerated aging tests or severe weather exposure on hardwood reconstituted structural composite panels. This study found that 13 of the […]
|
Forest Products Journal | 1983 |
|
Effects of Furnish Type on Properties of Thin, Reconstituted Wood Panels
Large flakes, refined fiber, and particles were evaluated for production of thin, medium-density panels suitable for use as doorskins. The most promising panels were composed of three layers with fiber […]
|
Forest Products Journal | 1977 |
|
Effects of Layer Characteristics on the Properties of Three-Layer Particleboards
Layer properties of specific gravity, tensile strength, and stiffness parallel to the surface were determined on three-layer boards. Face material was 0.020- x 0.50- x 2-in. disk cut flakes; core […]
|
Forest Products Journal | 1975 |
|
Effects of Moisture on the Hardness of Selected Commercial Wood-Base Panel Materials
Hardness tests were run on twenty-nine selected wood-base panel materials; six plywoods, eleven particleboards, nine hardboards, one insulation board, one aluminum siding material, and one waste-paper board at four moisture […]
|
Forest Products Journal | 1976 |
|
Effects of Post Manufacture Board Treatments on Formaldehyde Emission: A Literature Review (1960-1984)
This paper reviews the literature dealing with the many post-manufacture board treatments used to reduce formaldehyde emission from urea-formaldehyde bonded boards. Such treatments have almost solely used one or more […]
|
Forest Products Journal | 1986 |
|
Effects of Separate Additions to Furnish Or Veneer on Formaldehyde Emission and Other Properties: A Literature Review (1960-1984)
Separate additions of furnish or veneer refers to treatment of those substrates with formaldehyde reactive materials (scavengers) before or after coating with the adhesive in order to reduce formaldehyde emissions […]
|
Forest Products Journal | 1985 |
|
Effects of Several Test Variables on Evaluation of Particleboard Abrasiveness
The effects of number of cuts (degree of knife dulling), depth of cut, knife hardness, and knife-sharpening techniques on evaluation of the abrasiveness of particleboard were studied. The experimental procedure […]
|
Forest Products Journal | 1977 |
|
Effects of Test Methods and Exposure Conditions on Lateral Nail and Staple Resistance of Wood-Base Panel Materials
Three test methods were compared as to their suitability for determining the lateral nail resistance of wood-base panel materials: the standard ASTM Dl037 method, the American Plywood Association (APA) performance […]
|
Forest Products Journal | 1985 |
|
Effects of Two Methods of Accelerated Aging on Strength and Stiffness of Composite Structural Lumber
COM-PLY truss lumber produced in a pilot plant was tested for durability by using two different accelerated aging procedures: the ASTM D 1037 6-cycle accelerated aging test and 6 cycles […]
|
Forest Products Journal | 1985 |
|
Effects of wood-based panel characteristics on thermal conductivity
Wood-based panels are used in a variety of residential, commercial, and industrial applications in which their thermal properties may influence the overall performance of the panel or the assembly. These […]
|
Forest Products Journal | 1989 |
|
Efficiency of Resin-Wood Particle Blending
Two aspects of the efficient use of resin in a blender were studied: how well the resin is initially applied, and how well the resin is spread on the wood […]
|
Forest Products Journal | 1974 |
|
Efficiency of Urea- and Phenol-Formaldehyde in Particleboard
Urea-formaldehyde and phenol-formaldehyde resins were compared as binders in Douglas-fir particleboard. Urea-formaldehyde produced strength properties equal to those of boards made with equal amounts of phenol-formaldehyde under same conditions. Resin […]
|
Forest Products Journal | 1963 |
|
Elastic Analysis of Surface Reinforced Particleboard
Structural panel products are generally made from flakes, with a large length to width ratio, or wafers. Another possibility is to use lower grade particles in combination with reinforcement. A […]
|
Forest Products Journal | 1985 |
|
Emission of Formaldehyde By Particleboard: Effect of Ventilation Rate and Loading on Air-Contamination Levels
Dynamic tests for determining the formaldehyde emission behavior of UF-bonded boards involve the measurement of formaldehyde concentration in the air within a vessel which contains a specified board loading L […]
|
Forest Products Journal | 1981 |
|
Engineering for General Particleboard Plants
In this discussion of engineering for particleboard plants the author warns that anyone planning to build or improve a particleboard plant should seek advice from experienced personnel and should travel […]
|
Forest Products Journal | 1967 |