Advanced Search
| Title | Publication | Publish Year |
|---|---|---|
|
Preventing Termite Attack By Adding Insecticide to Particleboard, Hardboard and Plywood Adhesive
Fabricated building materials (particleboard, hardboard, and plywood) are susceptible to termite attack if preventive steps are not taken. Three insecticides (chlordane, heptachlor, and HCS-3260 [a modified chlordane that has all […]
|
Forest Products Journal | 1979 |
|
Problems and Practices in Wood Preservation, 1958-9
Maintaining and developing new markets for “preserved” forest products is a perennial problem, but the financial rewards are worth the effort. Piling.–strong competition from steel and concrete has been partially […]
|
Forest Products Journal | 1960 |
|
Producing Particle Board By a Continuous Process
Describes a press designed for the continuous production of particle board, with board length limited only by means of handling. Physical properties of the board may be varied to meet […]
|
Forest Products Journal | 1956 |
|
Product and Process Variables Associated with a Shaped Particle Beam
Several forming methods were tried in constructing 9-1/4-inch by 8-foot I-beams of reconstituted wood particles using shaped molds and standard particleboard pressing techniques. The forming method holding most promise for […]
|
Forest Products Journal | 1975 |
|
Production of Panelboard from Residue Left from the Fermentation of Organic Waste for Methane
Urban solid waste was fermented to produce methane and the residue was made into panelboards. Analyses showed that the cellulose/lignin ratio was 6.9:1 for the raw waste and 2.9:1 for […]
|
Forest Products Journal | 1977 |
|
Profiles in Dimensional Behavior of Particles in Simulated Particleboard Constructions
Dimensional changes in simulated particleboard constructions of aspen were studied to determine behavior patterns of particles when subjected to compression, soaking, and subsequent reconditioning. While this study was designed to […]
|
Forest Products Journal | 1966 |
|
Progress in 1960 . . . Glues and Gluing Processes
Progress report of FPRS Division of Glues and Gluing Processes including symposium on adhesives at U.S. Forest Products Laboratory; statistics on production of plywood; phenol-resin glues in plywood; other plywood […]
|
Forest Products Journal | 1961 |
|
Properties comparison of furniture grade MS and M2 particleboard products manufactured in Canada
A comparative survey of MS and M2 grade particleboard from two different Canadian manufacturers was conducted to quantify the distinction between grades and the consistency in quality of products marketed […]
|
Forest Products Journal | 2005 |
|
Properties of 1/2-Inch Composite Plywood with Southern Yellow Pine Veneer Faces and Unidirectionally Oriented Southern Oaks Strand Core
Evaluation was made of certain mechanical properties and dimensional changes of 1/2-inch composite plywood, fabricated from 1/8-inch-thick southern pine veneer faces and 1/4-inch unidirectionally oriented strand cores made from a […]
|
Forest Products Journal | 1983 |
|
Properties of Flakeboards from Hardwoods Growing on Southern Pine Sites
Boards 0.5 inch thick were made from 3-inch-long flakes of 9 species of southern hardwoods commonly found on pine sites. The main effects of species were due to variation in […]
|
Forest Products Journal | 1975 |
|
Properties of maize-stalk-based cement-bonded composites
Homogeneous cement-bonded particleboards 6 mm in thickness were made from maize stalk with Portland cement and calcium chloride. Boards were produced at two levels of cement/maize stalk ratio and three […]
|
Forest Products Journal | 2006 |
| Hardwood Symposium Proceedings | 1974 | |
|
Properties of Particle Board Related to Its Use in Furniture Manufacture
Data on particle boards properties are detailed provide general information on its advantages and limitations in furniture manufacture. Compared to lumber core, particle board is superior in hardness, dimensional stability, […]
|
Forest Products Journal | 1957 |
|
Properties of Particle- and Hardboard Made from Healthy and Beetle-Killed Southern Pine
The southern pine beetle kills pine trees on millions of acres in the southeastern United States each year. In this study we investigated the suitability of wood from beetle-killed trees […]
|
Forest Products Journal | 1982 |
|
Properties of particleboard from Korean thinning logs
Korean thinning logs, which are Pinus rigida Miller, Pinus densiflora Sieb. et Zucc., Larix leptolepis Gordon, and Quercus acutissima Carruthers, were used as raw material for particleboard (PB). PBs were […]
|
Forest Products Journal | 2003 |
|
Properties of Particleboard from Loblolly Pine Logging Residues
The suitability of varying amounts of tree tops, branches, and needles as furnish for underlayment quality particleboard was investigated. A OF resin adhesive was used. Results indicate that up to […]
|
Forest Products Journal | 1977 |
|
Properties of Particleboard from Loblolly Pine Rootwood and Aboveground Stumpwood
Experimental particleboards made from 16-year old loblolly pine rootwood and above-ground stumpwood using 7 percent urea formaldehyde solids met commercial standards CS236-66, Type 1-B-2.
|
Forest Products Journal | 1978 |
|
Properties of Particleboard from Southern Yellow Pine and Cottonwood Mixtures
Physical and mechanical properties of medium density, urea formaldehyde particleboards of various mixtures of Southern yellow pine and cottonwood furnish were determined. Resin content, press conditions and furnish were comparable […]
|
Forest Products Journal | 1976 |
|
Properties of Particleboard from Sweetgum
Several urea boards were made with sweetgum furnish of various heartwood: sapwood proportions ranging from all heartwood to all sapwood. Resin content, press conditions, and furnish were comparable to those […]
|
Forest Products Journal | 1976 |
|
Properties of particleboard made with a polyfurfuryl-alcohol/urea-formaldehyde adhesive
The suitability of a new, polyfurfuryl-alcohol/urea-formaldehyde (PFAFUF) adhesive in particleboard manufacturing was evaluated in this study. Experimental boards were made with softwood particles and the new adhesive under different combinations […]
|
Forest Products Journal | 1996 |
|
Properties of Particleboards from Mixtures of Philippine Hardwoods
Satisfactory urea-bonded particleboards were manufactured from furnishes prepared from three different chip mixtures of Philippine hardwoods with average SGs of 0.50, 0.72, and 0.52. Board properties were influenced by the […]
|
Forest Products Journal | 1978 |
|
Properties of Steam-Pressed Particleboard
Thin southern pine flakes were formed into panels about 14 in. square and 0.6 in. thick in a laboratory press with vented platens. Saturated steam at gauge pressures of 100 […]
|
Forest Products Journal | 1976 |
|
Properties of Structural Flakeboard Manufactured from 7-Year-Old Intensively Cultured Poplar, Tamarack, and Pine
Structural flakeboard made from 7-year-old intensively cultured tamarack and jack pine was less durable and had poorer mechanical properties than either of two poplar hybrid clones grown under the same […]
|
Forest Products Journal | 1986 |
|
Properties of structural panels fabricated from bioremediated CCA-treated wood: Pilot scale
Particleboard and flakeboard panels were fabricated from remediated CCA-treated southern yellow pine. Treated wood, flaked or comminuted into particles, was remediated in 12-kg batches using oxalic acid extraction, followed by […]
|
Forest Products Journal | 2006 |
|
Properties of Structural Particleboards
Phenolic-bonded particleboards were made to study effects of particle geometry, resin content, and panel density on strength, durability, and, dimensional stability properties. All panels were 1/2 by 24 by 28 […]
|
Forest Products Journal | 1974 |