Advanced Search
| Title | Publication | Publish Year |
|---|---|---|
|
Finnish Plywood Particleboard, and Fiberboard with a Lignin-Base Adhesive
A lignin-base adhesive has been developed at the Finnish Pulp and Paper Research Institute for the plywood, particleboard, and fiberboard industry. In this adhesive, high-molecular-weight lignin derivatives are isolated from […]
|
Forest Products Journal | 1979 |
| Hardwood Symposium Proceedings | 1987 | |
|
Fire Resistance of Solid-Core Wood Flush Doors
The five types of “solid-core” wood flush doors representing current fabrication to NWMA Industry Standard IS-69 showed a fire resistance of 30 minutes when tested according to ASTM Standard E152-66, […]
|
Forest Products Journal | 1973 |
|
First Minehunter Made of Laminated Preserved Timber Launched
Preserved pressure-treated laminated and solid timbers were the major construction materials for the mine sweeper U.S.S. Bittern. Wolman salts and a copper-bearing chemical were used for preservative depending on location […]
|
Forest Products Journal | 1957 |
|
First Volume Utilization of California Hardwoods
Utilization of tanoak and other possible California hardwoods is discussed as product development. The product is a heavy-duty industrial flooring. The aspects investigated were: timber volume and availability; methods of […]
|
Forest Products Journal | 1965 |
| Hardwood Symposium Proceedings | 1988 | |
|
Fixation and leaching of red maple (Acer rubrum L.) treated with CCA-C
Fixation and leaching of chromated copper arsenate (CCA) Type C wood preservative in red maple (Acer rubrum L.) boards were investigated using the expressate method to follow chromium fixation and […]
|
Forest Products Journal | 1997 |
|
Fixation of chromated copper arsenate (CCA) in selected Appalachian hardwoods
In the Appalachian region, various hardwood species are commercially treated with chromated copper arsenate (CCA) preservative. Previous research has shown that fixation of CCA in hardwoods is different than in […]
|
Hardwood Symposium Proceedings | 1994 |
|
Fixed Knife-Pressure Bar System for Surfacing Dry Wood
Conventional planing methods can cause surface defects and subsurface damage such as torn grain. A fixed-knife method may avoid many of the defects commonly associated with planing, but cleavage failure […]
|
Forest Products Journal | 1986 |
|
Fixed-knife pressure-bar planing method reduces or eliminates subsurface damage
Yellow-poplar and hard maple specimens conditioned at 8 percent MC were surfaced with a fixed-knife pressure-bar combination after abrasive and knife planing (peripheral milling). The rake and clearance angles for […]
|
Forest Products Journal | 1989 |
|
Flame-Spread Measurements By the Radiant Panel Flame-Spread Method
The radiant-panel flame-spread test method indicated that variations in moisture content and mean density can cause appreciable differences in results from the same materials. At the same mean density and […]
|
Forest Products Journal | 1960 |
|
Flattening wavy eucalyptus veneer during finish-drying
Sliced Eucalyptus globulus veneer 0.5 mm (1/50 in.) thick, which had been pre-dried in a conventional non-pressure dryer, was finish-dried in an inexpensive, continuous press dryer for thin veneer, resulting […]
|
Forest Products Journal | 1999 |
|
Flattening wavy eucalyptus veneer through pressure and temperature — a preliminary laboratory study
A study was conducted to identify the variables that play a key role in flattening partially dry, wavy eucalypts veneer 0.5 mm thick and to determine the magnitude of these […]
|
Forest Products Journal | 1995 |
|
Flexural properties of eastern hardwood pallet parts
Accurate estimates of the flexural properties of pallet parts are critical to the safe, yet efficient, design of wood pallets. To develop more accurate data for hardwood pallet parts, 840 […]
|
Forest Products Journal | 1991 |
|
Flexural Strength of Polymer-Impregnated Eastern White Pine
Eastern white pine heartwood was impregnated with a mixture of styrene monomer and cross-linking agent. A wood-polymer combination was produced using a heat-catalyst technique. The flexural properties of the combination […]
|
Forest Products Journal | 1985 |
|
Fluidized Bed Drying of Yellow-Poplar Veneer
A cylindrical fluidized bed, 4 inches in diameter and 2 feet in length, was used to dry 0.10 by 2 by 6 inch samples of rotary-cut yellow-poplar (Liriodendron tulipifera L.) […]
|
Forest Products Journal | 1970 |
|
Forced-Air Drying of Lumber–Research and Experimental
A special lumber drying test in a commercial forced-air dryer was carried out and the data compared with the research data obtained in Forest Service test studies at Athens, Ga. […]
|
Forest Products Journal | 1961 |
|
Forecasting hardwood stumpage price trends in Pennsylvania
Commonly used timber species with the longest time series in the Pennsylvania Timber Market Report (TMR) fell into three distinct groups of price growth over the 1984 to 2003 lifespan […]
|
Forest Products Journal | 2005 |
| Hardwood Symposium Proceedings | 1974 | |
|
Forest Industries in the U.S.S.R.
In 1966 the Russian Academy of Science published “Geography of Forest Industries” by V. D. Gorovoj and G. A. Privalovskaja. According to the article one-third of the U.S.S.R. is forested […]
|
Forest Products Journal | 1967 |
| Hardwood Symposium Proceedings | 1973 | |
|
Forest Research and Its Relation to the Wood-Using Industries in the Southeast
The role of the Southeastern Forest Experiment Station in work on several forest research problems in the Southeast is delineated. These problems include: 1) a continuing comprehensive survey of forest […]
|
Forest Products Journal | 1953 |
|
Forest survey results for higher grade hardwood sawtimber
The 1987 Forest Survey of Mississippi shows a slight increase in forest area and a substantial gain in hardwood inventory. Hardwood gains, appearing in all diameter classes, suggest an increase […]
|
Hardwood Symposium Proceedings | 1991 |
| Hardwood Symposium Proceedings | 1985 | |
|
Formaldehyde Dynamic Air Contamination By Hardwood Plywood: Effects of Several Variables and Board Treatments
Small, edge-sealed specimens of an unfinished lauan plywood were subjected to dynamic (air ventilated) tests at a variety of board loadings (L) (m2 of board area per m3 of chamber […]
|
Forest Products Journal | 1982 |