Advanced Search
| Title | Publication | Publish Year |
|---|---|---|
|
A Method for Proportioning Resin and Wax in Particleboard
The cost of additives in a particleboard process represents 40 to 60 percent of the total direct manufacturing costs. Fifty percent of this is for wax and resin, which, for […]
|
Forest Products Journal | 1960 |
|
A method for recording annual ring orientation in boards
A method has been developed to accurately determine and record the orientation of the annual rings for sawn boards in which the annual rings possess appreciable curvature. The orientation can […]
|
Forest Products Journal | 1987 |
|
A Method For Relating GPS Performance To Forest Canopy
This paper describes the development of a quantitative method of classifying forest canopy that can be related to degradation in Differential GPS (DGPS) performance. Using digital images taken vertically skywards […]
|
International Journal of Forest Engineering | 2001 |
|
A Method For Relating GPS Performance To Forest Canopy
This paper describes the development of a quantitative method of classifying forest canopy that can be related to degradation in Differential GPS (DGPS) performance. Using digital images taken vertically skywards […]
|
- | 2001 |
|
A method for simulating multiple correlated lumber properties
A technique is presented for simulating correlated lumber properties, which are not necessarily normally distributed, by using a transformation of the multivariate normal distribution. The method exactly preserves the probability […]
|
Forest Products Journal | 1989 |
|
A method for the characterization of knots in logs
Yield optimization studies require information on the internal structure of logs. A major constraint to the development of data about internal log structure has been the lack of an accurate […]
|
Forest Products Journal | 1997 |
|
A method for the prevention of wood decay from nail penetration
Durability of yellow-poplar and American beech treated with chromated copper arsenate (CCA) was evaluated in field plots in West Virginia and Mississippi. Stakes were vacuum-pressure treated with CCA Type-C (CCA-C) […]
|
Forest Products Journal | 2001 |
|
A Method of Charcoal Analysis
Because of the wide range of production methods for charcoal lumps and briquettes, the quality of the product is not always uniform and consistent with the established levels for general […]
|
Forest Products Journal | 1961 |
|
A Method of Quantitative Topographic Analysis of Wood Surfaces
A method of amplifying, recording, and numerically rating the profile of a wood surface is discussed. The method consists of converting changes in surface topography to changes in strain by […]
|
Forest Products Journal | 1957 |
|
A method of testing the full cross section of wood in tension perpendicular to the grain
This report describes a method of testing wood specimens in tension perpendicular to the grain whereby the entire cross section of the wood may be subjected to stress. This method […]
|
Forest Products Journal | 1994 |
|
A Method to Analyze Rough Mill Productivity
A brief survey of hardwood processing pointed up the diversity of techniques and thus the need for a method to compare the costs of dimension stock produced by them. The […]
|
Forest Products Journal | 1972 |
|
A Method to Assess and Prioritize Customer Needs Among Substitute Materials
Increasing the competitiveness of wood as a building material requires knowledge of quality improvements and/or product development needed to best satisfy customers. As such, information is needed regarding the impact […]
|
Journal of Forest Products Business Research | 2006 |
|
A Method to Measure Saw-Chain Lubrication
A saw-bar with a saw-chain is a common tool in both mechanized and motor-manual harvesting operations. The friction between the saw-bar and the saw-chain must be reduced by lubrication. A […]
|
International Journal of Forest Engineering | 2007 |
|
A Method to Measure Saw-Chain Lubrication
A saw-bar with a saw-chain is a common tool in both mechanized and motor-manual harvesting operations. The friction between the saw-bar and the saw-chain must be reduced by lubrication. A […]
|
- | 2007 |
|
A mill study of the quality, yield, and mechanical properties of plywood produced from fast-grown loblolly pine
Due to the increasing demand for wood fiber as well as the desire to produce fiber using shorter rotation ages (30 to 35 years) efforts have been made to greatly […]
|
Forest Products Journal | 1987 |
|
A miniature mechanical apparatus and test protocol for bending and crushing tests in wood preservation research
A miniature mechanical test apparatus for determining the modulus of elasticity and crushing strength of small wood specimens has been developed. This apparatus provides a sensitive method for laboratory studies […]
|
Forest Products Journal | 1996 |
|
A Model for Predicting Productivity in Subgrade Preparation of Forest Roads by Excavator
The effect of terrain factors on productivity in subgrade preparation by excavator was studied. The data
|
- | 1989 |
|
A Model for Predicting Productivity in Subgrade Preparation of Forest Roads by Excavator
The effect of terrain factors on productivity in subgrade preparation by excavator was studied. The data, collected in a follow-up time study of 57 road sections, was analyzed using multiple […]
|
International Journal of Forest Engineering | 1989 |
|
A model of chunkwood combustion
The burning rate of yellow-poplar and black spruce wood chunks (15 cm diameter by 5, 7.5, and 10 cm thick) was measured by inserting and removing individual chunks in a […]
|
Forest Products Journal | 1988 |
|
A model of the effect of fines content on the strength properties of oriented strand wood composites
A study with 6-inch-long aspen strands and mill fines material showed that increasing fines content, when evenly distributed through the product thickness, reduces the bending strength properties of oriented strand […]
|
Forest Products Journal | 2002 |
|
A model of the effect of orienter design and operating variables on the mean angular deviation of oriented wood strands
A model has been developed of the effects on the mean angular deviation of oriented strands of orienter design variables, such as the choice of discs or vanes, the width […]
|
Forest Products Journal | 2002 |
|
A model of the effect of strand angle and grain angle on the strength properties of oriented veneer and strand wood composites
A model has been developed of the effect of grain and strand angles, parallel and cross oriented veneer and strand layers, and veneer and strand thickness, on the strength properties […]
|
Forest Products Journal | 2002 |
|
A model of the effect of strand length and strand thickness on the strength properties of oriented wood composites
A model has been developed of the mechanism by which stress is transferred between contiguous particle components of oriented strand products such as oriented strandboard and oriented strand lumber. It […]
|
Forest Products Journal | 2001 |
|
A model to estimate regional softwood sawmill conversion efficiency
This study develops a model to estimate U.S. softwood sawmill conversion efficiency by region. Data from 650 softwood sawmills in all geographic regions of the United States were analyzed. A […]
|
Forest Products Journal | 1990 |
|
A Modified Method for the Preservative Treatment of Southern Pine Fence Posts
The tests here reported were made to ascertain what influence difference in relative density and growth rate of loblolly pine posts treated under low pressure at short times had on […]
|
Forest Products Journal | 1952 |