Advanced Search
| Title | Publication | Publish Year |
|---|---|---|
|
Formaldehyde Emission from Particleboard and Plywood Paneling: Measurement, Mechanism, and Product Standards
A number of commercial pane products, primarily particleboard and hardwood plywood, were tested for their formaldehyde emission behavior using desiccator, perforator, and dynamic chamber methods. The results were analyzed in […]
|
Forest Products Journal | 1983 |
|
Formulation of a Lignin-Based Plywood Adhesive from Steam-Exploded Mixed Hardwood Lignin
Utilization of the lignin isolated during the biomass conversion of lignocellulosic materials is of prime importance to the economic potential of any biomass conversion scheme. In the Southern United States, […]
|
Forest Products Journal | 1986 |
|
Freezing and Thawing Times for Black Walnut
One-inch-thick black walnut heartwood at 73 percent moisture content and 70? F was frozen to -5? F in 5 hours with ambient temperatures of -14? F. Two-inch-thick parts took 18-1/2 […]
|
Forest Products Journal | 1974 |
|
From okra to oak: reforestation of abandoned agricultural fields in the lower Mississippi alluvial valley
There has been a tremendous upsurge in interest in reforestation of bottomland hardwoods. In the lower Mississippi alluvial valley, reforestation projects are occurring on a large scale on abandoned agricultural […]
|
Hardwood Symposium Proceedings | 1997 |
|
Fuel chip harvesting: small-scale experience in New Brunswick
This paper reports results of several years’ experience using small-scale fuel chip production from forest thinnings and residues. The work was undertaken to demonstrate and monitor this method of woody […]
|
Forest Products Journal | 1987 |
|
Fuel Values of Stems and Branches in Post Oak and Red Maple
Fuel values were determined for stems and branches in two hardwood species, post oak and red maple. A significant difference was found between the higher heating value (HHV) of the […]
|
Forest Products Journal | 1985 |
|
Fuel Values of Stems and Branches in White Oak, Yellow-Poplar, and Sweetgum
Fuel values were determined for stems and branches in three hardwood species: white oak, yellow-poplar, and sweetgum. A significant difference was found between the higher heating value of the stemwood […]
|
Forest Products Journal | 1984 |
|
Full-Tree and Complete-Tree Utilization for Pulp and Paper
By the year 2000, world demand for paper and paperboard will be more than 400 million metric tons per year. Demand for wood will be in the order of 4.0 […]
|
Forest Products Journal | 1974 |
|
Fumigants Kill the Oak Wilt Fungus in Wood
Of 15 commonly available chemicals, two were effective in killing all oak wilt fungi in stems 3 to 4 inches in diameter and 8 inches long. The oak test specimens […]
|
Forest Products Journal | 1961 |
|
Fumigation May End Oak Embargoes
Because several countries will not permit the import of oak logs and lumber from the United States unless the logs and lumber are certified by the USDA as being free […]
|
Forest Products Journal | 1963 |
|
Fumigation of red beech logs for reducing gray stain in lumber
The discoloration of sapwood of red beech (Nothofagus fusca) after kiln-drying has been an ongoing problem that lowers the wood’s value for applications such as flooring and cladding. The occurrence […]
|
Forest Products Journal | 2001 |
|
Fungicides to Prevent Sapstain and Mold on Hardwood Lumber
Fungicides with lower mammalian toxicity than sodium pentachlorophenate were screened in laboratory tests on yellow-poplar to identify effective sapstain and mold preventatives. Some of the tested fungicides are currently used […]
|
Forest Products Journal | 1981 |
|
Furnish moisture content, resin nonvolatile content, and assembly time effects on properties of mixed hardwood strandboard
The objective of this research was to investigate the effects of three levels each of furnish moisture content (MC) (2%, 5%, 8%), resin nonvolatile content (50.8%, 54.8%, 58.8%), and assembly […]
|
Forest Products Journal | 1988 |
| Hardwood Symposium Proceedings | 1988 | |
| Hardwood Symposium Proceedings | 1979 | |
|
Furniture Species: A Forecast of Tomorrow’s Trends
The total volume of lumber, plywood, and veneer will increase in furniture manufacture, but the utilization per unit volume of furniture output will decline because of the substitution of particleboard […]
|
Forest Products Journal | 1967 |
| Hardwood Symposium Proceedings | 1974 | |
| Hardwood Symposium Proceedings | 1981 | |
|
Future demands for hardwood timber
Total United States consumption of hardwood timber products is currently nearly eighty-six percent larger than the volume used 40 years ago. All of this increase has come since the mid-1970’s, […]
|
Hardwood Symposium Proceedings | 1990 |
| Hardwood Symposium Proceedings | 1990 | |
|
Future of Sawmilling in the North Woods
The sawtimber growth in the North Woods area, from Maine to Minnesota, is about 12 billion board feet and steadily increasing. Annual cut of lumber has stabilized at about 4 […]
|
Forest Products Journal | 1966 |
| Hardwood Symposium Proceedings | 1984 | |
| Hardwood Symposium Proceedings | 1980 | |
|
Global demand for certified hardwood products as determined from a survey of hardwood exporters
U.S. hardwood exporters were surveyed to determine the current international markets for certified hardwood products (CHWP) and to document the experiences of hardwood exporters concerning CHWP and certification. There was […]
|
Forest Products Journal | 2005 |
| Hardwood Symposium Proceedings | 1990 |