Advanced Search
| Title | Publication | Publish Year |
|---|---|---|
|
Global markets for U.S. hardwood components
U.S. hardwood dimension and flooring manufacturers (SIC 2426) were surveyed in the spring of 1995 about their 1994 operations to better understand this value-added industry in terms of demographic variables, […]
|
Forest Products Journal | 1997 |
|
Gluebond Strength of Laser Cut Wood
The degree of strength loss when gluing laser cut wood as compared to conventionally sawn wood and the amount of additional surface treatment needed to improve bond quality were assessed […]
|
Forest Products Journal | 1985 |
|
Glueline Characteristics and Bond Durability of Southeast Asian Species After Solvent Extraction and Planing of Veneers
Bond durability and microscopic characteristics of gluelines were studied in plywood made with veneers of nine species of Southeast Asian woods. Veneers were either planed, extracted with a 1 percent […]
|
Forest Products Journal | 1980 |
|
Gluing and Fabricating Flush Doors
Hollow-core door production facilities have shifted from a few large plants to many smaller operations located in expanding urban areas. These new plants are designed to use precut ready-to-assemble materials […]
|
Forest Products Journal | 1957 |
|
Gluing Characteristics of Softwood Veneers and Secondary Western Hardwood
Most adhesives developed for the softwood plywood industry were designed for use with Douglas-fir (Pseudotsuga menziesii). With the interest in utilizing other western softwoods and hardwoods in plywood, a review […]
|
Forest Products Journal | 1961 |
| Hardwood Symposium Proceedings | 1975 | |
|
GRASP: a prototype interactive GRAphic Sawing Program
A versatile microcomputer-based interactive graphics sawing program has been developed as a tool for modeling various hardwood processes, from bucking and topping to log sawing, lumber edging, secondary processing, and […]
|
Forest Products Journal | 1996 |
|
Green dimensioning: a review of processing, handling, drying, and marketing
Parts for furniture, cabinets, and similar products are commonly cut from lumber that has been dried as full-size boards. However, escalating lumber prices, lower log quality, and environmental constraints are […]
|
Forest Products Journal | 1995 |
|
Green Lumber Grade Yields from Factory Grade Logs of Three Oak Species
Multivariate regression models were developed to predict green board foot yields for the seven common factory lumber grades processed from white, black, and chestnut oak factory grade logs. These models […]
|
Forest Products Journal | 1986 |
|
Gross Heat of Combustion of Five Hardwood Species At Differing Moisture Contents
The heat of combustion was determined for samples of some Northeastern hardwood sawdusts and yellow poplar bark. Oven dry material was wetted to obtain a range of moisture contents up […]
|
Forest Products Journal | 1974 |
|
Ground skidding and harvested stand attributes in Appalachian hardwood stands in West Virginia
A statewide logging-in-progress study was conducted in West Virginia to examine the associations among several ground skidding and harvested stand attributes. There was a strong positive association between skidding distance […]
|
Forest Products Journal | 2003 |
|
Growth of Bright Golden Anne Chrysanthemums in Hardwood Bark Amended Media as Affected By Nitrogen Level and State of Decomposition
Chrysanthemum growth was evaluated in fresh or 30 day composted bark amended media from each of four hardwood species, Acer saccharinum L., Platanus occidentalis L., Celtis occidentalis L. and Populus […]
|
Forest Products Journal | 1975 |
|
Growth stresses and strains in Acacia mangium
The growth stresses and other properties of timber from plantation trees of Acacia mangium affected by the high growth rate were investigated in order to clarify the relationship between growth […]
|
Forest Products Journal | 1999 |
| Hardwood Symposium Proceedings | 1975 | |
|
HaLT: a computerized training program for hardwood lumber graders
A computer program for training both novice and experienced hardwood lumber graders in accordance with the National Hardwood Lumber Association (NHLA) rules is presented. It is anticipated that this program […]
|
Forest Products Journal | 1989 |
|
HaLT2 — an enhanced lumber grading trainer
This paper reports on HaLT2, an improved version of HaLT (Hardwood Lumber Training Program) — a computer program that provides training in lumber grading. The newly added enhancements in HaLT2 […]
|
Forest Products Journal | 1992 |
|
Hard Maple Raw Material for Furniture Components: Effect of Sawmill Edging Practice on the Yield
A sample of 3,100 board feet of hard maple lumber was edged by 5 different practices – Conventional, Severe, Optimum, Wide, and Unedged – to determine their effect on surface […]
|
Forest Products Journal | 1967 |
|
Hardboard from Hardwood
This paper describes the development of a special hardboard made from hardwood chips. The development originated from a new method for converting hardwood waste into pulp which takes advantage of […]
|
Forest Products Journal | 1950 |
|
Hardboards from Mixed Tropical Hardwoods
Forest products users selectively exclude most wood species growing in the natural tropical forests because they are believed to be undesirable by reason of either product quality or processing problems. […]
|
Forest Products Journal | 1979 |
|
Hardened-Steel Versus Stiff-Stock Nails in Warehouse Pallets
A two-thirds increase in the rigidity of double-face, notched three-stringer, red oak, southern pine, and red pine lumber, 48 inch by 40 inch warehouse pallets can be expected, regardless of […]
|
Forest Products Journal | 1974 |
|
Hardness and Hardness Modulus of Wood-Polymer Composites
Hardness tests were made on untreated and treated (PMMA) samples of red oak, hard maple, and aspen. Both the standard hardness test (ASTM D143) and that for modified wood (ASTM […]
|
Forest Products Journal | 1973 |
| Hardwood Symposium Proceedings | 2001 | |
|
Hardwood and Pine Fence Posts Treated By the Double-Diffusion Method–Final Report
In 1955, the double-diffusion method was considered an economical preservative treatment process for fenceposts. This treatment offered a potential way of converting low-value hardwood species into higher value, durable fenceposts. […]
|
Forest Products Journal | 1986 |
|
Hardwood Bark as a Growing Media for Container Grown Ornamentals
The utilization of hardwood bark as a soil amendment for growth of both herbaceous and woody ornamental plants in containers was evaluated. These studies compared bark amended soils with peat […]
|
Forest Products Journal | 1971 |
|
Hardwood Bark Chips as a Surfacing Material for Recreation Trails
Medium and coarse grades of central states hardwood bark chips were used in this experiment. A 24 by 36 inch Kinesko lawn roller was modified by welding 1-7/8 inch outside […]
|
Forest Products Journal | 1973 |