Advanced Search
| Title | Publication | Publish Year |
|---|---|---|
|
Properties of Structural Particleboards from Douglas-Fir Forest Residues
Structural particleboards bonded with phenolic resin were prepared from forest residues using Douglas-fir and some hemlock-true fir mixtures. Various diameters and proportions of sound wood, dead wood, decayed wood, tops, […]
|
Forest Products Journal | 1974 |
|
Properties of Three-Layer Oriented Strandboard from Southern Hardwoods
Experimental test results are presented for three-layer, 1/2-inch-thick, 4- by 8-foot oriented strandboards, made from two mixtures of southern hardwoods using a 6 percent solids liquid phenol-formaldehyde resin. Test results […]
|
Forest Products Journal | 1985 |
|
Properties variation study of furniture grade M2 particleboard manufactured in Canada
In response to a lack of readily available comparative data on mechanical properties of Canadian-made particleboard, furniture grade M2 particleboard panels were obtained from six randomly selected manufacturing facilities (press […]
|
Forest Products Journal | 2005 |
|
Prospective U.S. Wood Use Situation
Lower expected population growth, smaller anticipated economic growth, new timber products, and shifting resources will change future wood use patterns. New Forest Service studies conclude that wood products consumption during […]
|
Forest Products Journal | 1980 |
|
Protection from Termites: Penta for Particle Board
With the goal of obtaining new markets for particleboard in the termite infested tropics, two sets of particleboards were prepared under standard conditions, one set bonded with urea resin and […]
|
Forest Products Journal | 1960 |
|
Quality Control in Sanding Particle Board
Sanding is only one step in achieving proper thickness tolerance. Thickness tolerance includes control over preparation and mixing of the board’s basic materials, spreading, and pressing techniques. Eight boards of […]
|
Forest Products Journal | 1957 |
|
Quantitative Determination of Phenolic Resins in Particleboard
A method was developed for determining the amount of phenol-formaldehyde or resorcinol-formaldehyde resin in particleboard. The method employs chlorosulfonic acid (CSA) at room temperature to dissolve the wood which is […]
|
Forest Products Journal | 1966 |
|
Racking Resistance of Wall Components Constructed with Particleboard Decking
The racking resistance of wall components constructed with particleboard decking was evaluated. Variables included southern pine particleboard (urea- and phenolic-bonded decking), weathering condition (unweathered and weathered on an outdoor test […]
|
Forest Products Journal | 1979 |
|
Racking Strength of Walls Sheathed with Structural Flakeboards Made from Southern Species
Ten types of structural flakeboards and two types of southern pine plywood were evaluated. Racking loads were applied to full-size racking panels (8 by 8 ft., according to ASTM E […]
|
Forest Products Journal | 1980 |
|
Rapid Method to Determine Internal Bond and Density Variations of Particleboard
By organizing and simplifying the routine of plant hot testing of particleboard for internal bond (IB) and density variations, it is possible to reduce the response time between sample removal […]
|
Forest Products Journal | 1981 |
|
Recent Trends in the Wood Industry of Japan
Japan depends on imports to fill two-thirds of its demand for wood. The main suppliers are Southeast Asia, North America, Siberia, and New Zealand. Since wood consumption is high because […]
|
Forest Products Journal | 1980 |
| Hardwood Symposium Proceedings | 1981 | |
|
Red Oak Structural Particleboard
Though demand for softwood timber will rise more rapidly than supply through the year 2000, demand for hardwood timber will grow at a slower rate than supply. Much of the […]
|
Forest Products Journal | 1979 |
|
Redwood Bark Fiber in Particleboard
Three-layer particleboards prepared from redwood particles including 0, 10, 20, and 30 percent redwood bark fiber were studied at urea resin levels of 7.6, 9.2, and 10.8 percent. In general, […]
|
Forest Products Journal | 1971 |
|
Reel Wheels: An Application of Material Science
Circular plates of reconstituted wood were fabricated and destructively tested to appraise the potential of such material for cable reel flanges. The reconstituted wood consisted of flakeboard from quality-cut flakes […]
|
Forest Products Journal | 1979 |
|
Regional economic impacts of structural particleboard in the United States, 1979 to 1988
This paper examines the regional distribution of certain impacts due to the introduction of structural particleboard, a major technological advance in structural wood panels. The distribution of consumer benefits and […]
|
Forest Products Journal | 1992 |
|
Relationship Between Driving Torque and Screwholding Strength in Particleboard and Plywood
Studies were made of the effect produced on withdrawal strength by overdriving screws. The results confirmed the difficulty of power-driving screws into particleboard and softwood plywood. The governing characteristic is […]
|
Forest Products Journal | 1970 |
|
Relationship of Flake Size and Resin Content to Mechanical and Dimensional Properties of Flake Board
Ratio of flake length to thickness is a better indicator of flake board properties than is either dimension independently. Increases in resin spread increase bending strength only moderately. Stiffness is […]
|
Forest Products Journal | 1961 |
|
Relative Strength of Boards Made from Bark of Several Species
A series of particleboards was made from nine species of eastern tree barks to gain information on the relative strength of bark boards compared to a laboratory produced aspen flakeboard. […]
|
Forest Products Journal | 1969 |
|
Requirements for Coatings to Prefinish Fiberboards and Particleboards
Requirements for coatings to prefinish fiberboards and particleboards can be simple or complex depending on the quality desired and the production line available. Consideration of physical data is necessary to […]
|
Forest Products Journal | 1962 |
|
Research Program to Develop Performance Specifications for the Veneer-Particleboard Composite Panel
A broad summary is given of a research program to develop performance specifications for veneer-particleboard composite panels. The program, which is being conducted by the American Plywood Association (APA) in […]
|
Forest Products Journal | 1975 |
|
Resin Application in Attrition-Mill Type Particle Board
Study was made of the effect on particle board properties of amount of resin, form of resin, and effect of adding resin before and after grinding. Another phase involved an […]
|
Forest Products Journal | 1955 |
|
Resin Binders from Kraft Lignin
A waterproof resin based on kraft lignin and a one-stage phenol formaldehyde (PF) resin was prepared and some of its properties evaluated. The preparation involved methylolation of the kraft lignin […]
|
Forest Products Journal | 1978 |
|
Resin Distribution in Flakeboard Shown By Ultraviolet Light Photography
Color photomicrographs of particleboard cross sections by ultraviolet light give new important information on flake-to-flake bonding. The photographs, taken of cross sections of particleboards glued with resins containing a dye […]
|
Forest Products Journal | 1968 |
|
Resin Distribution in Layered Particleboard
Resin distribution in multi-layer and three-layer particleboards was studied by varying the resin levels of each layer while maintaining a constant total resin content in the board of 6 percent […]
|
Forest Products Journal | 1970 |