Advanced Search
| Title | Publication | Publish Year |
|---|---|---|
|
Particleboard made from remediated CCA-treated wood: evaluation of panel properties
CCA-treated southern yellow pine (SYP) chips were remediated utilizing acid extraction alone, and using acid extraction followed by bioleaching with the metal-tolerant bacterium Bacillus licheniformis CC01. “Cleaned” chips were used […]
|
Forest Products Journal | 2001 |
|
Particleboard Production, Markets, and Raw Material Trends in the United States
A questionnaire mailed to all particleboard plants operating in the United States in 1973 showed that more than 90 percent of all board produced was medium density particleboard. Approximately 99 […]
|
Forest Products Journal | 1976 |
|
Particleboard Quality as Affected By Planer Shaving Geometry
This research study concerns the redesigning of planer heads in order to produce more flake-like shavings and permit particleboards to be produced which have characteristics more nearly like flakeboards. Two […]
|
Forest Products Journal | 1964 |
|
Particleboard Strength as Affected By Unequal Resin Distribution on Different Particle Fractions
Varying resin distributions within various particle size classifications (screen fractions) of particleboard furnish affected IB, MOR, and MOE. Two studies were made. First, a commercial particleboard furnish was screened into […]
|
Forest Products Journal | 1978 |
|
Particleboard–Today and Tomorrow
The engineering of particleboard for specific end uses is a prominent factor in two general areas of application. In the construction field, particularly in housing, particleboard is in use as […]
|
Forest Products Journal | 1961 |
|
Particleboard: Microscopic Observations of Resin Distribution and Board Fracture
Scanning electron microscopy enabled study of the wood-adhesive relation in particleboard. Commercial furnish was sprayed with urea-formaldehyde in a laboratory blender and then pressed into board. The wood particles were […]
|
Forest Products Journal | 1976 |
|
Performance of finishes on western juniper lumber and particleboard during outdoor exposure
The increasing number of western juniper trees per acre and the expansion of its range is resulting in watershed degradation, loss of site productivity, decrease in forage production, loss of […]
|
Forest Products Journal | 2005 |
|
Performance of Plywood and Composite Panels Under Concentrated and Impact Loads
The American Plywood Association program related to impact and concentrated load performance of plywood and veneer particleboard composite panels had three stages: defining the minimum load limits and stiffness levels […]
|
Forest Products Journal | 1975 |
|
Performance of Truss Plate Joints in Structural Flakeboard and Southern Pine Dimension Lumber
Two types of metal truss connectors in four sizes installed in structural flakeboards were tested in tension. The structural flakeboards were of two types: a commercial three-layer oriented strandboard (OSB) […]
|
Forest Products Journal | 1986 |
|
Physical and Mechanical Properties of Cement Bonded Southern Pine Excelsior Board
This paper presents some physical and mechanical properties of commercially produced cement excelsior board (CEB). The industrial manufacturing process was described. The water absorption and dimensional changes of CEB subjected […]
|
Forest Products Journal | 1984 |
|
Physical and Mechanical Variations in Cottonwood and Hickory Flakeboards Made from Flakes of Three Sizes
Variations in physical and mechanical properties of cottonwood and hickory flakeboards made from three flake sizes were studied. The properties of MOE, MOR, FSPL, Maximum Stress in Tension and Internal […]
|
Forest Products Journal | 1971 |
|
Physical Properties of Phenolic Bonded Wafer-Type Particleboard from Mixtures of Aspen, Paper Birch, and Tamarack
The effect on the physical properties of phenolic bonded wafer-type aspen particleboard by the addition of paper birch and tamarack was evaluated. Laboratory boards were manufactured at densities of 38, […]
|
Forest Products Journal | 1973 |
|
Pilot Test of Four 16-Foot, Wood-Base Composite Garage Headers
Four beam types were tested in a pilot study to investigate the feasibility of designing a 16-foot garage header using 2 by 4 lumber and structural particleboard. Full-scale performance test […]
|
Forest Products Journal | 1977 |
|
Plastic Overlays for Wood Products
Paper overlays on plywood, lumber, veneer, hardboards, and particleboards provide a new surface with properties that change the basic product. An overlay may hide defects and create a decorative surface; […]
|
Forest Products Journal | 1956 |
|
Plasticizing Wood with Ammonia–A Progress Report
The present state-of-the art for plasticizing wood with ammonia is described. The practicality of plasticizing with gaseous ammonia at room temperature is emphasized. Forming experiments with different species of solid […]
|
Forest Products Journal | 1970 |
|
Plaswood, New High Density Chipboard
Development, manufacture, uses and limitations of a new high density (42 pounds per cubic foot) chipboard are, described. It is produced in Canada. A urea adhesive is used in bonding […]
|
Forest Products Journal | 1953 |
|
Pollution Control Activities At Georgia-Pacific
When solid wood wastes cannot be used in making pulp and, paper or sold for hog fuel, a properly designed and operated wigwam burner is an effective and economical alternative. […]
|
Forest Products Journal | 1971 |
|
Ponderosa Pine Woodwork Residues for Dry Formed Particleboard
With a serious shortage of plywood panels for use in its doors and kitchen units, the Curtis Companies Incorporated turned its attention to the daily accumulation of 25 tons of […]
|
Forest Products Journal | 1953 |
|
Potential Raw Material Supply for Wood Fiber Products
Enormous supplies of raw material suitable for wood fiber products can be obtained from logging and manufacturing residuals and from small and cull trees that are not included in forest […]
|
Forest Products Journal | 1953 |
|
Prediction of Elastic Constants of Particleboard
An analytic technique based on the finite-element method of structural analysis was developed to predict tensile and shear moduli of mat-formed, homogeneous flakeboard as a function of the properties of […]
|
Forest Products Journal | 1974 |
|
Prefinishing Mende Board
Commercial production of Mende board (Mende) in North America started in 1971. Prefinishing followed close behind. Compared to competing products, prefinished Mende has the advantages of relatively stable low cost. […]
|
Forest Products Journal | 1980 |
|
Preliminary Evaluation of a Wood-Cement Composite
Sawdust and (or) wood slivers were used as aggregate and combined with cement to form test blocks. Wood:cement ratios varied from 40:60 to 57:43 on a dry weight basis. An […]
|
Forest Products Journal | 1976 |
|
Preliminary Evaluation of Two Tongue-And-Groove Joints for Five-Ply Structural Sandwich Wood Panels for Floors
Two designs of tongue and groove (T & G) joints were evaluated for 5-ply, 7/8″ thick, structural sandwich wood panels This type of sandwich panel has been suggested as a […]
|
Forest Products Journal | 1976 |
|
Preservation of Particleboard and Hardboard with Pentachlorophenol
Three methods of preserving composition board were attempted in the laboratory: 1) spraying the processed wood chips with aqueous sodium pentachlorophenate just prior to adding the adhesive, 2) adding pentachlorophenol […]
|
Forest Products Journal | 1958 |
|
Preservative Treatment Effects on Mechanical and Thickness Swelling Properties of Aspen Waferboard
Eighteen liquid or powdered phenolic resole resin-bonded types of aspen (Populus tremuloides) waferboard were manufactured incorporating eight commercially manufactured and one experimental preservative. Preservatives were applied by pretreating wafers, incorporating […]
|
Forest Products Journal | 1982 |