Advanced Search
| Title | Publication | Publish Year |
|---|---|---|
|
The Manufacture of Molded Articles from Resin Bonded Granulated Wood
Molding articles from granulated wood with a resin binder provides a method of more complete wood utilization. Such products are 60-90 percent wood. Particle forms and resins can be chosen […]
|
Forest Products Journal | 1954 |
|
The Market Outlook for Plywood
The consumption of softwood plywood in the year 1975 will be close to 36 billion square feet, 3/8-inch basis. Three developments not considered in previous forecasts are: 1) the emergence […]
|
Forest Products Journal | 1969 |
|
The Marketing of Lumber and Forest Products to the Government
Last year, the U. S. government spent over 16 billion dollars in direct cash outlays for military construction, office buildings, post offices, research centers, schools, hospitals, and interstate highway systems. […]
|
Forest Products Journal | 1961 |
|
The Mechanics of Auger Cutters for Wood
The force and power requirements as functions of the major variables affecting auger cutting were documented. The cutter parameters studied were the helix and rake angles, the machine variables were […]
|
Forest Products Journal | 1983 |
|
The Peculiarity of Compression of Conifers in Radial Direction
Formulas used in the case of homogeneous materials have given satisfactory results in most directions where the continuity of certain density layers exist. However, in the radial direction, this is […]
|
Forest Products Journal | 1963 |
|
The Penetration of Light Into Wood
A characteristic of many woods exposed to strong sunlight is to change to a dark brown color on the surface. Four methods were used to measure transmission of light through […]
|
Forest Products Journal | 1957 |
|
The Physical Properties of 101 Chinese Woods
Information is given on the physical properties of important Chinese woods. This is probably the first time that compiled data of 101 Chinese species have been presented in English. Included […]
|
Forest Products Journal | 1962 |
|
The Properties of Thermo-Catalytically Prepared Wood-Polymer Composites
Gamma radiation has been used to initiate the polymerization of monomers infused in wood. Monomers with a low G value, such as styrene, are usually chosen for this process. In […]
|
Forest Products Journal | 1970 |
|
The Psychological Image of Wood
Every product has an image; the image can be broken into two levels, physical and psychological. The psychological image can be quite complex as well as very important. The specific […]
|
Forest Products Journal | 1965 |
| Hardwood Symposium Proceedings | 1993 | |
|
The Relationship Between the Cutting Properties of Wood and Its Physical and Mechanical Properties
The validity of the postulate that the indentation phase of cutting in a plane perpendicular to the grain may be terminated by failure in tension parallel to the grain, has […]
|
Forest Products Journal | 1962 |
|
The role of pre-infection of green Douglas-fir lumber in aboveground decay in structures in California
Limited information is available on the decay fungi present aboveground in structures and there are no known U.S. studies of decay present in green, Douglas-fir construction lumber obtainable from retail […]
|
Forest Products Journal | 1997 |
|
The Separation and Properties of Hemicellulose, Cellulose, and Hydrogenated Lignin from Sawdust
Most of the hemicellulose may be separated from hardwood sawdust by a brief alkaline extraction. The residual wood meal can be pulped in a soda cook with less alkali than […]
|
Forest Products Journal | 1958 |
|
The Shrinkage Intersection Point–Its Significance and the Method of Its Determination
The shrinkage intersection point is defined as the moisture content at which the extended linear portion of the shrinkage-moisture content curve intersects the line of zero shrinkage. Practical importance of […]
|
Forest Products Journal | 1956 |
|
The Story Behind . . . the New Southern Pine Plywood Industry
From tests at the U.S. Forest Products Laboratory in Madison, Wisconsin, southern pine plywood has been proved equal to Douglas-fir plywood as a competitive sheathing grade. Since this declaration three […]
|
Forest Products Journal | 1964 |
|
The thermal conductivity of plantation grown white pine (Pinus strobus) and red pine (Pinus resinosa) at two moisture content levels
The thermal conductivity values for white and red pine at two different moisture content levels were measured. When ovendry, the thermal conductivity of the white pine was 0.078W/m-K and was […]
|
Forest Products Journal | 2004 |
|
The use of linear attenuation coefficients of gamma radiation for detecting knots in Pinus radiata
This paper reports on the preliminary results of a research project designed to develop an automated defect-detection and timber-classifying system for Pinus radiata (D. Don), by using a collimated gamma-ray […]
|
Forest Products Journal | 1999 |
|
The visual grading system for Scots pine logs in relation to the quality of sideboards produced
Presorting logs in the sawmill?s log yard is one of the strategies used by the Swedish sawmilling industry in order to maximize profits. Almost 96 percent of Swedish sawmills perform […]
|
Forest Products Journal | 2003 |
|
The Wettability of Wood
The ease and effectiveness with which a liquid can spread over a solid surface is of fundamental importance in processes such as adhesion, surface coating, wetting and waterproofing, detergency, and […]
|
Forest Products Journal | 1962 |
|
Thermal Properties of Dry Wood-Bark Multilayer Boards
Recent work by the authors has been concerned with the manufacture and mechanical properties of three-layer composite boards. The boards consisted of outer surfaces about 1/8 inch thick made of […]
|
Forest Products Journal | 1975 |
|
Thick Slicing of Wood: Effects of Wood and Knife Inclination Angle
In many cutting situations, both the longitudinal axis of the wood and the knife edge can be inclined relative to the direction of cutting motion. In this study, inclination angles […]
|
Forest Products Journal | 1972 |
|
Thick-Slicing of Wood: Effects of Bar-Type and Speed of Cut on Quality of Slice
Red oak, yellow poplar and Douglas-fir flitches were sliced to 1/2 inch thickness at 140F with an experimental cutting machine allowing variation in speed of cut (5 and 200 feet […]
|
Forest Products Journal | 1976 |
|
Thickness Loss in Hot-Pressed Plywood
Thickness losses in plywood panels during hot-pressing are well known but recent trends toward gluing at higher veneer moisture content (MC) and press temperature result in losses much greater than […]
|
Forest Products Journal | 1983 |
|
Thickness swelling and its relationship to internal bond strength loss of commercial oriented strandboard
Samples from two types of mixed hardwood oriented strandboard (OSB) and two types of southern pine OSB were tested to study thickness swelling (TS) and its relationship to internal bond […]
|
Forest Products Journal | 1999 |
|
Thickness, Moisture Content, and Specific Gravity of Inner and Outer Bark of Some Pacific Northwest Trees
Availability of several studies made of thickness and percentage of bark is noted. Recent work involving inner and outer bark of 13 conifers and six hardwoods used commercially in British […]
|
Forest Products Journal | 1971 |